|
| |
 |
|
|
| |
|
| |
 |
For Finished Blocks Up to 8" — 1/4" Seam Allowance Built In! Instructions:
|
|
| |
|
| |
 |
For Finished Blocks Up to 12" — 1/4" Seam Allowance Built In! Instructions:
|
|
| |
| 3-6-9 Design System Square-it Tool 9.5" x 9.5" |
|
|---|---|
 |
The 3-6-9 Design System Square-it Tool is a specially
designed tool to help you square off your 3-6-9 Design
Blocks to a perfect 9.5" square while aligning your 3" o r
6" seams to the precise placement before cutting your
block, so that all your 3-6-9 blocks will line up perfectly
when you assemble your quilt top. The 3-6-9 Design
System Square-it tool has large numbers at the 3 and
6" points on the ruler so that you can easily see and
accurately align the 3" and 6" points on your block.
|
| 1034197 - $24.99
|
|
| Color Evaluator II 13" x 50" |
|
|---|---|
 |
Use these filters to select colors for VALUE - the relative LIGHTNESS or DARKNESS in the color. |
| 1026033 - $7.50
|
|
| Mylar Heat Resistant Sheets 10" x 12" |
|---|
 |
| 1026041 - $8.75
|
|
The original Quilter's Rule (QR-1) was designed by Betty Gall in 1987.
Today you can get this uniquely made ruler in all shapes, sizes. These plastic injection molded rulers
have clean, crisp, accurate lines. The molded lines keep fabric from slipping, allowing for fast,
accurate rotary cutting. These are 1/2" and 1/4" markings and the rectangular rulers have 30, 45 & 60 degree lines.
The seam guide (QR-SG) includes a 3/16" seam allowance.
| |
|---|---|
 |
|
 |
 |
|
"Square Rulers"
The original Quilter's Rule (QR-1) was designed by Betty Gall in 1987.
Today you can get this uniquely made ruler in all shapes, sizes and colors.These plastic
injection molded rulers have clean, crisp, accurate lines. The molded lines keep fabric from
slipping, allowing for fast, accurate rotary cutting.
These are 1/2" and 1/4" markings. All molded rulers come in Black.
|
|
|---|---|
 |
 |
 |
 |
|
"Triangle Rulers"
These plastic injection molded rulers have clean, crisp, accurate lines.
The molded lines keep fabric from slipping, allowing for fast, accurate rotary cutting.
These are 1/2" and 1/4" markings. All molded rulers come in Black.
|
|
|---|---|
 |
|
 |
|